KHONKAEN B.S.K INTERTRAD (PG

www.bskthailand.com

10/100 Base-TX Single Fiber
Fast Ethernet Media Converter /FC/10/100
1 port Fast Ethernet

Detailed Product Description
            1. Overview
            The Media Converter complies with IEEE802.3z, IEEE802.3AB Standards. It is designed to conver data signal between 10/100 Base-TX and 100Base-FX fast Ethernet. It supports 10/100 Base-TX and 100Base-FX applications The data signal converted by such high performance media converter can be transmitted up to120Km Maximum by two fiber-optical cable
            The Converter is equipped with two fiber optic connectors for (One for transmitting-TX and one for receiving-RX) and two RJ-45 jacks and one external power supply receptacle. Six LED indicators are built-in for easy diagnosing and monitoring the status of power, Unshielded Twisted Paired (UTP) Link, UTP Activity, Fiber Link, Fiber Activity, Full duplex and data rates. It can be configured automatically for Full Duplex or Half Duplex operation.
            It is compact, cost-effective , low dissipative, high reliable and stable. It can be used in standalone applications, or Rack-Mounted applications where multiple media converter can be inserted into a rack-mount chassis (Up 10 units), and allowing all the converters to be powered by a single internal power supply.

2. Specifications:
                              2.1 Performance introduction (Table1)

Parameter	Type
Data rate(Mbps)	10/100
Optical Wavelength (nm)	1310T/1550R* 1550T/1310R*
Fiber type(µ m)	Single mode 9/125 Multi-mode 50/125
Connector type	SC/PC or ST/PC
Max distance(km)	20,40,60,100*
Power supply	1A, + 5VDC±5%
Operating temperature	0 70 C
Storage temperature	-40 80 C
Relative humidity	5% to 90% non Condensing
Size	119mmX 71mmX26mm

Table 1 : performance introduction
* Note : Please refer to Specifications.

2.2 Appearance (Fig.2,Table2)

Fig.2 Front Panel

LED	Color	Function
F-SD	Green	If the light is on,FX port speed is 100M
10/100	Green	Llight on means the TX port speed is 100Mpbs s , light off means TX port speed is 10M
L-AC T	Green	Llight on means the FX port is connected. Light blinzing means it is receiving data from TP
F-L	Green	Light on means fX port is conected;Light blizing means it is receiving data from TP
POW	Green	Light on means the power is connected
10/100	Green	Light on means full duplex work mode Light off means half duplex working mode

Table 2.LED performance

               3. DC Jack and DC-DC Power Adapter
               The DC jack’ s central post is 2.5mm wide, it conforms to the DC receptacle (2.5mm) on the 19-inch Converter Rack slot or DC-DC Power adapter.
               DC-DC Power Adapter:
               DC Input:-48V
               DC Output: 1A, +5VDC
               4. Check list
               Before you start installing the Converter, verify the package contains the following:

The 10/100/1000Base-T to 100Base-SX/LXEthernet Media Converter X1
The DC-DC Power Adapter X1
This User’ s Manual X1

Please notify your sales representative immediately if any of the aforementioned items is missing or damaged.

               5. Installing the Converter
                   5.1 For as a standalone unit:
                               5.1.1 Verify if the DC-DC adapter conforms to your country DC power requirement then insert the power plug
                               5.1.2 Check the type of UTP (see fig.3)
                                        UTP complies with IEEE802.3 Standards, and has two types :T568A T568B

Note: G: Green ; O:Orange; B: Blue; P:Palm
Parallel cable: connect T568A to T568A , or T568B to T568B
Crossing-over cable: connect T568A to T568B
                               5.1.3 TP port list (Fig.4)
                    5.2 Installing
                               5.2.1 TP port installing Auto – sensing for paralle and cross cable
                               5.2.2 Fiber port installing Connect the FX port on the media converter with the Single-mode SC fiber connectors.
                               5.2.3 Connect the SMPS power adaptor
                               5.2.4 Check the appearance that converter instructions light
               If the connections is correct, all the LED will be on; Otherwise checking the Connection of Fiber port and TP port.

Product

Link Web